Blogger Magic - Set Main Page Size

One of the most visible changes, to the blog display, involves properly setting main page size.

You change the posts count using "Show at most" on the dashboard Settings - Posts and comments page, or "Number of posts on main page" in the "Configure Blog Posts" wizard. Both let you set the main page display limit.

You can limit main page size by days with posts, or by total post count.

Main page size is your choice, for your blog - but think of your readers, waiting for a typical main page display to download.

Many don't have extreme bandwidth, nor are the Blogger servers overly robust. When your blog, or even a single post, takes 2 or 3 minutes to load, your blog may need tuning.

Main page size is one key setting, in encouraging reader activity, and in improving search engine relationships.

• "Show at most" on the dashboard Settings - Posts and comments page.
• "Number of posts on main page" in the "Configure Blog Posts" wizard.

"Show at most" on the dashboard Settings - Posts and comments page.

"Number of posts on main page" in the "Configure Blog Posts" wizard.

There are alternate techniques, for changing main page size - use of a dynamic template, with endless scrolling - and segmenting the blog using pages. And adding Jump Break, to the posts, lets you make the individual posts smaller.

But for a simple blog setup, just limiting main page size is the first step to showing your readers that you respect their need to view your blog, without excessive waiting.

---

One of the simplest changes that you can make to a #Blogger blog, to make it easier to view, involves setting a reasonable main page size. This helps your readers view the blog, in main page view, without a lot of waiting.

target="_blank"

Read More

You Cannot Fit Your Entire Blog Onto The Main Page

Some blog owners would like their readers to view the entire blog in one page.

A small blog, with very limited size, can theoretically fit on one page. If you intend to publish a blog with any future, and page rank, you will have to publish content periodically - and the size of the blog will increase, steadily.

And eventually, thanks in part to main page limitation by auto pagination, older posts in your blog will be forced into archive pages.

For a blog with any future, and publishing activity, there are four possibilities for main page size.

• Segment main page, limiting post count.
• Segment your blog, using virtual blogs.
• Use a dynamic template, and "continuous scrolling".
• Use a non dynamic template, and Jump Break - and accept archiving.

Segment main page, limiting post count.

One of the simplest ways to make your blog reader friendly is to limit main page size, using a post count limit. This won't work as a final solution, however, if you're planning to publish the blog with any regularity.

Segment your blog, using virtual blogs.

If you can break your blog into multiple subjects, you can use a Pages tabbed index to access each different subject. You can fit each different subject, possibly using Jump Break, onto one page.

To complement the virtual blogs, you can have a static main page - providing a "welcome" message, and / or indexing the virtual blogs.

Use a dynamic template, and "continuous scrolling".

For public blogs, a dynamic template, with continuous scrolling, may provide a solution. Dynamic templates, unless you a very comfortable with editing the blog template, will never offer the accessory and customisation possibilities of non dynamic templates, however.

With a dynamic template, you won't be able to use Jump Break - though some dynamic views may provide a summarised main page view.

Use a non dynamic template, and Jump Break - and accept archiving.

Careful use of Jump Break will let you limit the size of the main page. If you continue to publish posts - which is necessary for a blog with any future - you will eventually have posts displayed on archive pages.

For best results, design the blog structure - and the posts structure - consistently, and accept archiving and pagination.

---

Some #Blogger blog owners would like to display all post content in one page - and ignore page display size. They do not realise that not all blog readers want to read a blog with an unlimited page size, all at once.

Read More

Redirecting Any URL In Your Blog, To Another URL

In late 2011, Blogger Engineering gave us a new Blogger feature - the ability to redirect any URL in a blog, to any other URL in the blog.

Like any feature, we found an immediate use for it - something much requested, for a good while. Other people have found more uses for the redirection feature - and still others have found confusion.

The syntax used in the redirection "From" and "To" values is not always obvious - and occasionally there is confusion about what can - and can't - be done with redirection.

This is the URL of this post.

http://blogging.nitecruzr.net/2012/12/redirecting-any-url-in-your-blog-to.html

Using the redirection feature, I can redirect another URL in this blog, to this post - or conversely, I can redirect the URL of this post to another URL, in this blog.

You can only redirect within the blog.

Both the "From" and "To" values in "Custom Redirects" accept any static blog URL, less the base URL of that blog. You cannot specify the base URL - so all redirections will be within the blog itself.

You can redirect the blog home page display, within the blog.

The initial use for the redirection feature (at least, for me) was to replace the Home page of the blog, with another page or post - possibly, this post.

From: /
To: /2012/12/redirecting-any-url-in-your-blog-to.html

I could change the Home page of this blog, to start all new readers on the Topics Index page.

From: /
To: /p/topics.html

You can redirect one specific post URL reference, within the blog.

If I was to change the Title of this post, when re published, the URL would not change. If I wanted to change the URL of this post, I could redirect the desired URL, to the actual URL.

From: /2012/12/redirecting-any-urls-in-your-blog.html
To: /2012/12/redirecting-any-url-in-your-blog-to.html

You can make a shorter URL, for easy access inside or outside the blog.

If I want to allow this post to be accessed from a shorter URL, I can do that. If you click on the shorter URL (below), you will note that you still see the longer URL in the browser address window!

From: /redirecting-any-url-in-your-blog-to.html
To: /2012/12/redirecting-any-url-in-your-blog-to.html

I recently created a shortcut to my Topics index, as "blogging.nitecruzr.net/topics".

From: /topics
To: /p/topics.html

And here is a demonstration of a custom redirect, to my magic post about custom redirects.

From: /SimpleURL
To: /2013/01/blogger-magic-redirecting-url-in-your.html

Pick any two URLs, in the same blog.

To get the "From" and "To" values for any redirection, I simply take any two URLs in the same blog. Choose any two examples - one for "From", the other for "To".

• The Home page: http://blogging.nitecruzr.net/
• A post: http://blogging.nitecruzr.net/2012/12/redirecting-any-url-in-your-blog-to.html
• A static page: http://blogging.nitecruzr.net/p/topics.html
• A label search: http://blogging.nitecruzr.net/search/label/Redirecting
• A shortcut URL: http://blogging.nitecruzr.net/topics

And drop the base URL: http://blogging.nitecruzr.net

Giving:

• The Home page: /
• A post: /2012/12/redirecting-any-url-in-your-blog-to.html
• A static page: /p/topics.html
• A label search: /search/label/Redirecting
• A shortcut URL: /topics

Having developed the proper "From" and "To" values, adding a "Custom Redirects" entry is simple enough.

Make a cleaner "menu bar" display, if you redirect the home page.

Having setup a useful complement of Pages, and redirected the Home page, you may wish to remove the "Home" page tab. Just edit the Pages gadget, using the dashboard Layout wizard, or the on blog quick edit icon - not the dashboard Pages wizard - and de select the "Home" page.

A simple example, showing the result, may be seen in my demonstration blog, Home Page Redirected To Label Search.

From: /
To: /search/label/Home%20Page

There are some subtle limitations.

Note that a label search displays a fixed number of 20 posts, regardless of the "Show at most" / "Number of posts on main page" setting. If this is a problem for your blog, you can explicitly set maximum label search size, using the "max-results" modifier in the "To" value.

You may also wish to remove the "Showing posts with label ..." notice, if you like a cleaner display. In my demonstration blog (mentioned above), I did not do this - to make my examples more obvious.

The possibilities here are endless. Just use common sense - and again, note the limits on redirection.

Click here, for instructions. Note again, that the actual address, displayed in the browser address window, will not change. Note again: by design, you cannot specify the base URL - so all redirecting will be within the blog itself

Other than the latter limitations, though, this is a pretty powerful feature - when you understand the design.

Read More